Description
The 9point8™ Digit2.0™ remote is the ultimate dedicated one-by remote for all cable-operated seatposts like the Fall Line.
It boasts the lightest touch, the best ergonomics, and the best cable route of any of our remotes.
Mount it on the Left Hand Side, under the bar, in seconds!
Mount it on the Left Hand Side, under the bar, in seconds!
EASY TO INSTALL. VERY EASY. The 9point8 Digit2.0 can be installed without removing the grips, brakes, or shifter controls! You will need a new cable when you install the Digit. You can get one HERE, or from your local bike store.
SEALED BEARING PIVOT. The 9point8 Digit2.0 has a large 21mm sealed cartridge bearing pivot.
GRIPPY THUMB PAD. The 9point8 Digit2.0 has grip machined into the thumb pad.
BRAKE MOUNTING. The 9point8 Digit2.0 Shimano I-Spec B remote mounts directly on Shimano B brakes. See the INSTRUCTIONS TAB above. Alternative 22mm and 31.8mm bar clamp mounts, or Shimano I-Spec and SRAM MatchMaker mounts are available separately from 9point8 HERE.
Manufactured under agreement with Wolf Tooth Components, LLC
